Connected to Dynamips VM "default" (ID 1111, type c3600) - Console port

 
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: no

Press RETURN to get started!

Router＃c onfigure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#line console 0
Router(config-line)#password cisco
Router(config-line)#login
Router(config-line)#exit
Router(config)#exit
Router#
*Mar  1 00:53:03.275: %SYS-5-CONFIG_I: Configured from console by consoledisable
Router>exit

Router con0 is now available

Press RETURN to get started.

User Access Verification

% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: no


Press RETURN to get started!

*Mar  1 00:00:05.771: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Mar  1 00:00:05.775: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
*Mar  1 00:00:05.779: %LINK-3-UPDOWN: Interface Ethernet0/1, changed state to up
*Mar  1 00:00:05.783: %LINK-3-UPDOWN: Interface Ethernet0/2, changed state to up
*Mar  1 00:00:05.791: %LINK-3-UPDOWN: Interface Ethe
……

% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: yes
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.

Basic management setup configures only enough connectivity
for management of the system, extended setup will ask you
to configure each interface on the system

Would you like to enter basic management setup? [yes/no]: yesConfiguring global parameters: