Connected to Dynamips VM "default" (ID 1111, type c3600) - Console port
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
*Mar 1 00:00:06.063: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Mar 1 00:00:06.067: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
*Mar 1 00:00:06.075: %LINK-3-UPDOWN: Interface Ethernet0/1, changed state to up
*Mar 1 00:00:06.079: %LINK-3-UPDOWN: Interface Ethernet0/2, changed state to up
*Mar 1 00:00:06.083: %LINK-3-UPDOWN: Interface Ethernet0/3, changed state to up
*Mar 1 00:00:06.087: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
*Mar 1 00:00:06.095: %LINK-3-UPDOWN: Interface Serial1/1, changed state to up
*Mar 1 00:00:06.099: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up
*Mar 1 00:00:06.103: %LINK-3-UPDOWN: Interface Serial1/3, changed state to up
*Mar 1 00:00:07.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed state to up
*Mar 1 00:00:07.075: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/1, changed state to up
*Mar 1 00:00:07.079: %LINEPROTO-5-UPD
Router>OWN: Line protocol on Interface Ethernet0/2, changed state to up
*Mar 1 00:00:07.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/3, changed state to up
*Mar 1 00:00:07.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
*Mar 1 00:00:07.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed state to up
*Mar 1 00:00:07.099: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up
*Mar 1 00:00:07.103: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/3, changed state to up
*Mar 1 00:00:34.319: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
*Mar 1 00:00:34.387: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed state to down
*Mar 1 00:00:34.483: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down
*Mar 1 00:00:34.555: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/3, changed state to down
*Mar 1 00:05:19.047: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-IS-M), Version 12.3(21), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Mon 06-Nov-06 14:22 by ccai
*Mar 1 00:05:19.047: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
*Mar 1 00:05:20.507: %LINK-5-CHANGED: Interface Ethernet0/0, changed state to administratively down
*Mar 1 00:05:20.511: %LINK-5-CHANGED: Interface Ethernet0/1, changed state to administratively down
*Mar 1 00:05:20.515: %LINK-5-CHANGED: Interface Ethernet0/2, changed state to administratively down
*Mar 1 00:05:20.519: %LINK-5-CHANGED: Interface Ethernet0/3, changed state to administratively down
*Mar 1 00:05:20.523: %LINK-5-CHANGED: Interface Serial1/0, changed state to administratively down
*Mar 1 00:05:20.551: %LINK-5-CHANGED: Interface Serial1/1, changed state to administratively down
*Mar 1 00:05:20.551: %LINK-5-CHANGED: Interface Serial1/2, changed state to administratively down
*Mar 1 00:05:20.555: %LINK-5-CHANGED: Interface Serial1/3, changed state to administratively down
*Mar 1 00:05:21.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed state to down
*Mar 1 00:05:21.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/1, changed state to down
*Mar 1 00:05:21.515: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/2, changed state to down
*Mar 1 00:05:21.519: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/3, changed state to down
Router>enable
Router＃c onfigure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#enable password cisco
Router(config)#exit
*Mar 1 00:07:12.823: %SYS-5-CONFIG_I: Configured from console by console
Router#show running-config
Building configuration...
Current configuration : 895 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable password cisco
!
no aaa new-model
ip subnet-zero
!
!
ip cef
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
no ip address
shutdown
half-duplex
!
interface Ethernet0/1
no ip address
shutdown
half-duplex
!
interface Ethernet0/2
no ip address
shutdown
half-duplex
!
interface Ethernet0/3
no ip address
shutdown
half-duplex
!
interface Serial1/0
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/3
no ip address
shutdown
serial restart-delay 0
!
ip http server
ip classless
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end
Router＃c onfigure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#service password-encryption
Router(config)#exit
*Mar 1 00:08:32.707: %SYS-5-CONFIG_I: Configured from console by con
Router#show running-config
Building configuration...
Current configuration : 901 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable password 7 05080F1C2243
!
no aaa new-model
ip subnet-zero
!
!
ip cef
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
no ip address
shutdown
half-duplex
!
interface Ethernet0/1
no ip address
shutdown
half-duplex
!
interface Ethernet0/2
no ip address
shutdown
half-duplex
!
interface Ethernet0/3
no ip address
shutdown
half-duplex
!
interface Serial1/0
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/3
no ip address
shutdown
serial restart-delay 0
!
ip http server
ip classless
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end
Router＃c onfigure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#enable secret password
Router(config)#exit
*Mar 1 00:09:40.735: %SYS-5-CONFIG_I: Configured from console by console
Router#show running-config
Building configuration...
Current configuration : 948 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$j6bG$2lzpa54n7gbmege7ijpMK1
enable password 7 05080F1C2243
!
no aaa new-model
ip subnet-zero
!
!
ip cef
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
no ip address
shutdown
half-duplex
!
interface Ethernet0/1
no ip address
shutdown
half-duplex
!
interface Ethernet0/2
no ip address
shutdown
half-duplex
!
interface Ethernet0/3
no ip address
shutdown
half-duplex
!
interface Serial1/0
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/3
no ip address
shutdown
serial restart-delay 0
!
ip http server
ip classless
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end
Router# |
