% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
*Mar 1 00:00:05.771: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Mar 1 00:00:05.775: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
*Mar 1 00:00:05.779: %LINK-3-UPDOWN: Interface Ethernet0/1, changed state to up
*Mar 1 00:00:05.783: %LINK-3-UPDOWN: Interface Ethernet0/2, changed state to up
*Mar 1 00:00:05.791: %LINK-3-UPDOWN: Interface Ethernet0/3, changed state to up
*Mar 1 00:00:06.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed state to up
*Mar 1 00:00:06.779: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/1, changed state to up
*Mar 1 00:00:06.783: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/2, changed state to up
*Mar 1 00:00:06.791: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/3, changed state to up
*Mar 1 00:17:54.835: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-IS-M), Version
Router> 12.3(21), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Mon 06-Nov-06 14:22 by ccai
*Mar 1 00:17:54.851: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
*Mar 1 00:17:56.267: %LINK-5-CHANGED: Interface Ethernet0/0, changed state to administratively down
*Mar 1 00:17:56.271: %LINK-5-CHANGED: Interface Ethernet0/1, changed state to administratively down
*Mar 1 00:17:56.275: %LINK-5-CHANGED: Interface Ethernet0/2, changed state to administratively down
*Mar 1 00:17:56.279: %LINK-5-CHANGED: Interface Ethernet0/3, changed state to administratively down
*Mar 1 00:17:57.267: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed state to down
*Mar 1 00:17:57.271: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/1, changed state to down
*Mar 1 00:17:57.275: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/2, changed state to down
*Mar 1 00:17:57.279: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/3, changed state to down
Router>?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profile to interface
clear Reset functions
connect Open a terminal connection
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
modemui Start a modem-like user interface
mrinfo Request neighbor and version information from a multicast
router
mstat Show statistics after multiple multicast traceroutes
mtrace Trace reverse multicast path from destination to source
name-connection Name an existing network connection
pad Open a X.29 PAD connection
ping Send echo messages
ppp Start IETF Point-to-Point Protocol (PPP)
--More--
Router con0 is now available
Press RETURN to get started.
Router>enable
Router#?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profile to interface
access-template Create a temporary Access-List entry
alps ALPS exec commands
archive manage archive files
audio-prompt load ivr prompt
auto Exec level Automation
bfe For manual emergency modes setting
call Reload IVR call application, accounting template
ccm-manager Call Manager Application exec commands
cd Change current directory
clear Reset functions
clock Manage the system clock
cns CNS agents
configure Enter configuration mode
connect Open a terminal connection
copy Copy from one file to another
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
--More-- disconnect Disconnect an existing network connection
--More-- Press RETURN for another line, SPACE for another page, anything else to quit
--More-- enable Turn on privileged commands
erase Erase a filesystem
exit Exit from the EXEC
help Description of the interactive help system
isdn Run an ISDN EXEC command on an ISDN interface
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
microcode microcode commands
modemui Start a modem-like user interface
monitor Monitoring different system events
more Display the contents of a file
mrinfo Request neighbor and version information from a multicast
router
mrm IP Multicast Routing Monitor Test
mstat Show statistics after multiple multicast traceroutes
mtrace Trace reverse multicast path from destination to source
name-connection Name an existing network connection
ncia Start/Stop NCIA Server
no Disable debugging functions
pad Open a X.29 PAD connection
ping Send echo messages
ppp Start IETF Point-to-Point Protocol (PPP)
--More-- pwd Display current working directory
reload Halt and perform a cold restart
rename Rename a file
restart Restart Connection
resume Resume an active network connection
rlogin Open an rlogin connection
rsh Execute a remote command
sdlc Send SDLC test frames
send Send a message to other tty lines
setup Run the SETUP command facility
show Show running system information
slip Start Serial-line IP (SLIP)
squeeze Squeeze a filesystem
start-chat Start a chat-script on a line
systat Display information about terminal lines
tclquit Quit Tool Command Language shell
tclsh Tool Command Language shell
telnet Open a telnet connection
terminal Set terminal line parameters
test Test subsystems, memory, and interfaces
traceroute Trace route to destination
tunnel Open a tunnel connection
udptn Open an udptn connection
--More-- undebug Disable debugging functions (see also 'debug')
upgrade Upgrade software
verify Verify a file
vlan Configure VLAN parameters
voice Voice Commands
where List active connections
write Write running configuration to memory, network, or terminal
x28 Become an X.28 PAD
x3 Set X.3 parameters on PAD
Router#disable
Router>enable
Router＃c onfigure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#?
Configure commands:
aaa Authentication, Authorization and Accounting.
aal2-profile Configure AAL2 profile
access-list Add an access list entry
alias Create command alias
alps Configure Airline Protocol Support
arp Set a static ARP entry
async-bootp Modify system bootp parameters
backhaul-session-manager Configure Backhaul Session Manager
banner Define a login banner
bba-group Configure BBA Group
boot Modify system boot parameters
bridge Bridge Group.
bstun BSTUN global configuration commands
buffers Adjust system buffer pool parameters
busy-message Display message when connection to host fails
call Configure Call parameters
call-history-mib Define call history mib parameters
call-manager-fallback support call-manager fallback
carrier-id Name of the carrier associated with this trunk
group
ccm-manager Call Manager
--More-- cdp Global CDP configuration subcommands
cgma-agent Start the VoIP CGMA Agent
chat-script Define a modem chat script
class-map Configure QoS Class Map
clock Configure time-of-day clock
cns CNS agents
config-register Define the configuration register
connect cross-connect two interfaces
default Set a command to its defaults
default-value Default character-bits values
define interface range macro definition
dial-control-mib Define Dial Control Mib parameters
dial-peer Dial Map (Peer) configuration commands
dialer Dialer commands
dialer-list Create a dialer list entry
diffserv Differentiated Services (COPS)
dlsw Data Link Switching global configuration commands
dnsix-dmdp Provide DMDP service for DNSIX
dnsix-nat Provide DNSIX service for audit trails
do To run exec commands in config mode
downward-compatible-config Generate a configuration compatible with older
software
dspu DownStream Physical Unit Command
--More-- dss Configure dss parameters
enable Modify enable password parameters
end Exit from configure mode
errdisable Error disable
exception Exception handling
exit Exit from configure mode
fax Configure fax parameters
file Adjust file system parameters
frame-relay global frame relay configuration commands
gateway Gateway
gw-accounting Enable voip gateway accounting.
help Description of the interactive help system
hostname Set system's network name
http HTTP Config
interface Select an interface to configure
ip Global IP configuration subcommands
ipv6 Global IPv6 configuration commands
ivr ivr utility command
key Key management
kron Kron interval Facility
line Configure a terminal line
lnm IBM Lan Manager
locaddr-priority-list Establish queueing priorities based on LU address
--More-- logging Modify message logging facilities
login-string Define a host-specific login string
mac-address-table Configure the MAC address table
map-class Configure static map class
map-list Configure static map list
memory Configure memory management
memory-size Adjust memory size by percentage
menu Define a user-interface menu
mgcp Enable Media Gateway Control Protocol
microcode configure microcode
mls mls global commands
mmoip Multi Media Over IP
modemcap Modem Capabilities database
monitor Monitoring different system events
mta Configure the Mail Transfer Agent
multilink PPP multilink global configuration
ncia Native Client Interface Architecture
netbios NETBIOS access control filtering
no Negate a command or set its defaults
ntp Configure NTP
num-exp Dial Map Number Expansion configuration commands
parser Configure parser
partition Partition device
--More-- policy-map Configure QoS Policy Map
port-channel EtherChannel configuration
printer Define an LPD printer
priority-list Build a priority list
privilege Command privilege parameters
process-max-time Maximum time for process to run before
voluntarily relinquishing processor
prompt Set system's prompt
queue-list Build a custom queue list
random-detect-group Configure random-detect class
rbe Commands for Routing RFC 1483 Ethernet
encapsulated packets
regexp regexp commands
resume-string Define a host-specific resume string
rif Source-route RIF cache
rlogin Rlogin configuration commands
rmon Remote Monitoring
route-map Create route-map or enter route-map command mode
router Enable a routing process
rsrb RSRB LSAP/DSAP filtering
rtr RTR base configuration
saa SAA config options
sap-priority-list Establish queueing priorities based on SAP and/or
--More-- MAC address(es)
scheduler Scheduler parameters
security Infra Security CLIs
service Modify use of network based services
sgbp SGBP Stack Group Bidding Protocol configuration
shutdown Shutdown system elements
signaling-class Configure signaling class
sip-ua SIP User Agent (UA)
sna Network Management Physical Unit Command
snmp Modify non engine SNMP parameters
snmp-server Modify SNMP engine parameters
source-bridge Source-route bridging ring groups
spanning-tree Spanning Tree Subsystem
srcp Enable Simple Resource Coordination Protocol
stackmaker Specify stack name and add its member
standby Global HSRP configuration commands
state-machine Define a TCP dispatch state machine
stun STUN global configuration commands
subscriber Subscriber configuration
subscriber-policy Subscriber policy
table-map Configure Table Map
tacacs-server Modify TACACS query parameters
telephony-service Support Cisco IOS Telephony Service
--More-- template Select a template to configure
terminal-queue Terminal queue commands
tftp-server Provide TFTP service for netload requests
time-range Define time range entries
track Object tracking configuration commands
translate Translate global configuration commands
translation-rule Global digit manipulation and translation
trunk Global trunk configuration
username Establish User Name Authentication
vc-group Define a Frame Relay VC group
virtual-profile Virtual Profile configuration
virtual-template Virtual Template configuration
vlan VLAN commands
vm-integration enable in-band DTMF integration with voicemail
systems
voice Global voice configuration
voip-incoming Global incoming VoIP configuration
vpdn Virtual Private Dialup Network
vpdn-group VPDN group configuration
vpdn-template vpdn-template configuration
vtp Configure global VTP state
vty-async Enable virtual async line configuration
x25 X.25 Level 3
--More-- x29 X29 commands
xot Global XOT commands
Router(config)#exit
Router#
*Mar 1 00:48:54.159: %SYS-5-CONFIG_I: Configured from console by console |
